Learning WCF. A Hands-on Guide Michele Leroux Bustamante

Dostępność produktu

Produkt nie został jeszcze oceniony pod kątem ułatwień dostępu lub nie podano żadnych informacji o ułatwieniach dostępu lub są one niewystarczające. Prawdopodobnie Wydawca/Dostawca jeszcze nie umożliwił dokonania walidacji produktu lub nie przekazał odpowiednich informacji na temat jego dostępności.

Spis treści książki

• Learning WCF
• Dedication
• A Note Regarding Supplemental Files
• Forewords
• Preface
  • Who This Book Is For
  • How This Book Is Organized
    • Chapters Overview
    • Labs and Code Samples
  • Assumptions About the Reader
  • System Requirements
  • Your Working Directory
  • Conventions Used in This Book
  • Comments and Questions
  • Safari Enabled
  • Acknowledgments
• 1. Hello Indigo
  • 1.1. Service Oriented Architecture
    • 1.1.1. From OOP to SOA
    • 1.1.2. What Is a Service?
    • 1.1.3. Tenets of SOA
      • 1.1.3.1. Service boundaries are explicit
      • 1.1.3.2. Services are autonomous
      • 1.1.3.3. Clients and services share contracts, not code
      • 1.1.3.4. Compatibility is based upon policy
    • 1.1.4. Big SOA, Little SOA
  • 1.2. WCF Services
  • 1.3. Fundamental WCF Concepts
    • 1.3.1. Message Serialization
    • 1.3.2. Services
    • 1.3.3. Hosting
    • 1.3.4. Endpoints
    • 1.3.5. Addresses
    • 1.3.6. Bindings
    • 1.3.7. Metadata
    • 1.3.8. Proxies
    • 1.3.9. Channels
    • 1.3.10. Behaviors
  • 1.4. Creating a New Service from Scratch
    • 1.4.1. Lab: Creating Clients and Services Programmatically
      • 1.4.1.1. Creating a new service
      • 1.4.1.2. Hosting a service
      • 1.4.1.3. Creating a proxy to invoke a service
    • 1.4.2. Assembly Allocation
    • 1.4.3. Defining a Service
    • 1.4.4. Hosting a Service
    • 1.4.5. Exposing Service Endpoints
      • 1.4.5.1. Addresses
      • 1.4.5.2. Bindings
      • 1.4.5.3. Contracts
    • 1.4.6. Creating a Client Proxy
  • 1.5. Generating a Service and Client Proxy
    • 1.5.1. Lab: Using Tools to Generate Clients and Services
      • 1.5.1.1. Using the WCF Service template
      • 1.5.1.2. Configuring service endpoints using the Service Configuration Editor
      • 1.5.1.3. Generating a proxy with Add Service Reference
      • 1.5.1.4. Creating a WCF Service Library
      • 1.5.1.5. Generating a proxy using the Service Model Metadata Utility
    • 1.5.2. Service Templates
    • Service Testing Tools
    • 1.5.3. ServiceModel Metadata Utility
    • 1.5.4. Service Configuration Editor
    • 1.5.5. ServiceModel Configuration
    • 1.5.6. ServiceHost Initialization
    • 1.5.7. Enabling Metadata Exchange
    • 1.5.8. Working with Behaviors
      • 1.5.8.1. Service behaviors
      • 1.5.8.2. Endpoint behaviors
    • 1.5.9. Proxy Initialization
  • 1.6. Hosting a Service in IIS
    • 1.6.1. Lab: Creating an IIS Host and Browsing Metadata
      • 1.6.1.1. Creating a WCF Service web site
      • 1.6.1.2. Browsing service metadata
      • 1.6.1.3. Exporting metadata for proxy generation
    • 1.6.2. Web Site Templates
    • 1.6.3. @ServiceHost Declarations
    • 1.6.4. Message-Based Activation
    • 1.6.5. Browsing and Exporting Metadata
      • 1.6.5.1. Browsing metadata
      • 1.6.5.2. Exporting metadata
  • 1.7. Exposing Multiple Service Endpoints
    • 1.7.1. Lab: Hosting Multiple Services and Sharing Types
      • 1.7.1.1. Implementing multiple contracts on a service
      • 1.7.1.2. Hosting two services with multiple contracts
      • 1.7.1.3. Consuming internal services using shared contracts
      • 1.7.1.4. Consuming external services with a generated proxy
    • 1.7.2. Implementing Multiple Contracts
    • 1.7.3. Hosting Multiple Services
    • 1.7.4. Proxy Generation for Multiple Contracts and Endpoints
    • 1.7.5. Proxy Initialization and Lifetime
    • 1.7.6. Sharing Service Contracts
    • 1.7.7. Duplicating Operations
  • 1.8. Summary
• 2. Contracts
  • 2.1. Messaging Protocols
    • 2.1.1. SOAP
    • 2.1.2. WS*
  • 2.2. Service Description
    • 2.2.1. ServiceDescription
    • 2.2.2. WSDL
    • 2.2.3. WS-Policy
    • 2.2.4. WS-MetadataExchange
  • 2.3. WCF Contracts and Serialization
  • 2.4. Service Contracts
    • 2.4.1. Lab: Designing a Service Contract
      • 2.4.1.1. Exploring service contract compatibility
      • 2.4.1.2. Customizing message parameters
      • 2.4.1.3. Modifying service operations and dealing with version tolerance
    • 2.4.2. Mapping Services to WSDL
    • 2.4.3. Designing Service Contracts
      • 2.4.3.1. ServiceContractAttribute
      • 2.4.3.2. OperationContractAttribute
      • 2.4.3.3. MessageParameterAttribute
    • 2.4.4. Versioning Service Contracts
      • 2.4.4.1. Versioning with contract inheritance
      • 2.4.4.2. Versioning with separate contracts
      • 2.4.4.3. Strict versus non-strict versioning
  • 2.5. Data Contracts
    • 2.5.1. Lab: Working with Data Contracts
      • 2.5.1.1. Creating a data contract
      • 2.5.1.2. Customizing data contract serialization
      • 2.5.1.3. Consuming data contracts at the client
      • 2.5.1.4. Exploring version tolerance
    • 2.5.2. Mapping Data Contracts to XSD Schema
    • 2.5.3. Designing Data Contracts
      • 2.5.3.1. DataContractAttribute
      • 2.5.3.2. DataMemberAttribute
      • 2.5.3.3. EnumMemberAttribute
      • 2.5.3.4. CollectionDataContractAttribute
    • 2.5.4. Mapping CLR Namespace to Schema Namespace
    • 2.5.5. Configuring Known Types
      • 2.5.5.1. KnownTypeAttribute
      • 2.5.5.2. ServiceKnownTypeAttribute
      • 2.5.5.3. Declarative known types
    • 2.5.6. Versioning Data Contracts
      • 2.5.6.1. IExtensibleDataObject
      • 2.5.6.2. Explicit versioning
      • 2.5.6.3. Versioning flow diagrams
    • 2.5.7. Data Contracts As Operation Messages
  • 2.6. Message Contracts
    • 2.6.1. Lab: Controlling Message Serialization with Message Contracts
      • 2.6.1.1. Creating message contracts
      • 2.6.1.2. Implementing message contracts in a service
      • 2.6.1.3. Using proxies and message contracts
    • 2.6.2. Message Contracts and SOAP
    • 2.6.3. Designing Message Contracts
      • 2.6.3.1. MessageContractAttribute
      • 2.6.3.2. MessageBodyMemberAttribute
      • 2.6.3.3. MessageHeaderAttribute
    • 2.6.4. Client Message Contracts
    • 2.6.5. Versioning Message Contracts
  • 2.7. Approaches to Serialization
    • 2.7.1. Types Supporting Serialization
    • 2.7.2. Serialization Format
      • 2.7.2.1. Message Encoding
      • 2.7.2.2. DataContractFormatAttribute
      • 2.7.2.3. XmlSerializerFormatAttribute
    • 2.7.3. Applying the XmlSerializer
      • 2.7.3.1. Controlling serialization
      • 2.7.3.2. Proxy generation and the XmlSerializer
    • 2.7.4. Applying IXmlSerializable Types
      • 2.7.4.1. Implementing IXmlSerializable
      • 2.7.4.2. Supplying a schema
  • 2.8. The Message Type
    • 2.8.1. Lab: Working with Raw Messages
      • 2.8.1.1. Using untyped messages in the service contract
      • 2.8.1.2. Accessing message headers
      • 2.8.1.3. Extending the message type
    • 2.8.2. Untyped Messages and WSDL
    • 2.8.3. Working with the Message Type
      • 2.8.3.1. Creating messages
      • 2.8.3.2. Accessing message headers
    • 2.8.4. Filtering Messages
  • 2.9. Summary
• 3. Bindings
  • 3.1. How Bindings Work
    • 3.1.1. Standard Bindings
    • 3.1.2. Binding Features
    • 3.1.3. Binding Elements
    • 3.1.4. Building the Channel Stack
    • 3.1.5. Web Service Protocols
    • 3.1.6. Bindings and Metadata
    • 3.1.7. Constraints on Binding Selection
  • 3.2. Web Service Bindings
    • 3.2.1. Lab: Exposing Web Services with BasicHttpBinding and WSHttpBinding
      • 3.2.1.1. Exposing multiple web service endpoints
      • 3.2.1.2. Adding a web reference for the legacy client
      • 3.2.1.3. Adding a service reference for the non-legacy client
    • 3.2.2. Choosing a Web Service Binding
    • 3.2.3. BasicHttpBinding Features
      • 3.2.3.1. BasicHttpBinding defaults
      • 3.2.3.2. Customizing BasicHttpBinding
    • 3.2.4. WSHttpBinding Features
      • 3.2.4.1. WSHttpBinding defaults
      • 3.2.4.2. Customizing WSHttpBinding
    • 3.2.5. MessageVersion
    • 3.2.6. Isolating SOAP 1.1 and SOAP 1.2 Endpoints
  • 3.3. Connection-Oriented Bindings
    • 3.3.1. Lab: Distributing Calls with NetNamedPipeBinding and NetTcpBinding
      • 3.3.1.1. Setting up the lab
      • 3.3.1.2. Moving from components to services
      • 3.3.1.3. Crossing machine boundaries
    • 3.3.2. Choosing a Connection-Oriented Binding
    • 3.3.3. NetNamedPipeBinding Features
      • 3.3.3.1. NetNamedPipeBinding defaults
      • 3.3.3.2. Customizing NetNamedPipeBinding
    • 3.3.4. NetTcpBinding Features
      • 3.3.4.1. NetTcpBinding defaults
      • 3.3.4.2. Customizing NetTcpBinding
    • 3.3.5. Calling Services In-Process
    • 3.3.6. Distribution of Services
  • 3.4. One-Way and Duplex Communication
    • 3.4.1. Message Exchange Patterns
      • 3.4.1.1. Request-reply
      • 3.4.1.2. One-way
      • 3.4.1.3. Duplex
    • 3.4.2. Working with Callbacks
      • 3.4.2.1. Duplex proxies
      • 3.4.2.2. DuplexChannelFactory<T>
      • 3.4.2.3. Callback instance
      • 3.4.2.4. Client endpoint
    • 3.4.3. Lab: Duplex Communications over TCP and HTTP
      • 3.4.3.1. Designing the callback contract
      • 3.4.3.2. Issuing callbacks
      • 3.4.3.3. Choosing a duplex-compatible binding
      • 3.4.3.4. Implementing the callback contract
      • 3.4.3.5. Issuing callbacks over WSDualHttpBinding
      • 3.4.3.6. Callbacks and one-way operations
    • 3.4.4. WSDualHttpBinding Features
      • 3.4.4.1. WSDualHttpBinding defaults
      • 3.4.4.2. Customizing WSDualHttpBinding
    • 3.4.5. Services and Callback References
    • 3.4.6. Callbacks and Concurrency
  • 3.5. Large Message Transfers
    • 3.5.1. Lab: Using MTOM to Handle Large Messages with Binary Data
    • 3.5.2. Lab: Enabling Streaming for Large File Transfers
      • 3.5.2.1. Streaming from the service
      • 3.5.2.2. Streaming from the client
    • 3.5.3. Handling Large Messages
      • 3.5.3.1. Controlling payload size
      • 3.5.3.2. Reducing memory consumption
    • 3.5.4. Message Size Quotas
    • 3.5.5. MTOM Encoding
    • 3.5.6. Streaming
      • 3.5.6.1. Designing a service contract for streaming
      • 3.5.6.2. Enabling streaming
      • 3.5.6.3. Who closes the stream?
      • 3.5.6.4. Alternatives to streaming
  • 3.6. Custom Bindings
    • 3.6.1. CustomBinding Features
    • 3.6.2. Creating a CustomBinding
      • 3.6.2.1. Binary encoding over HTTP
      • 3.6.2.2. SOAP 1.2 without addressing headers
  • 3.7. Summary
• 4. Hosting
  • 4.1. Hosting Features
  • 4.2. ServiceHost
    • 4.2.1. Initializing the ServiceHost
    • 4.2.2. Declarative Configuration
    • 4.2.3. Base Addresses
    • 4.2.4. ServiceHost and ServiceDescription
    • 4.2.5. Closing the ServiceHost
    • 4.2.6. Communication Events
  • 4.3. Self-Hosting
    • 4.3.1. Console Applications
    • 4.3.2. Windows Applications
    • 4.3.3. Windows Services
  • 4.4. Hosting on the UI Thread
    • 4.4.1. Windows Applications and UI Threads
    • 4.4.2. Synchronization Context
    • 4.4.3. ServiceHost Lifetime
    • 4.4.4. Lab: Working with a Windows Forms Host
      • 4.4.4.1. Configuring the ServiceHost
      • 4.4.4.2. Opening and closing the ServiceHost
      • 4.4.4.3. Calling services on a non-UI thread
      • 4.4.4.4. Calling services on the UI thread
      • 4.4.4.5. Preventing services from joining the UI thread
    • 4.4.5. Callbacks and the UI Thread
    • 4.4.6. UI Hosting Scenarios
      • 4.4.6.1. Coupling services to the host user interface
      • 4.4.6.2. Exposing a reusable service user interface
      • 4.4.6.3. Decoupling services from user interfaces
  • 4.5. Hosting in a Windows Service
    • 4.5.1. What Are Windows Services?
      • 4.5.1.1. Controlling service startup
      • 4.5.1.2. Runtime identities
      • 4.5.1.3. Recovery
    • 4.5.2. Creating and Installing Windows Services
      • 4.5.2.1. Extending ServiceBase
      • 4.5.2.2. Event log access
      • 4.5.2.3. Registering the Windows service
      • 4.5.2.4. Providing an installer
    • 4.5.3. Lab: Creating a Windows Service Host
      • 4.5.3.1. Creating a new Windows Service
      • 4.5.3.2. Handling start and stop events
      • 4.5.3.3. Creating a Windows service installer
      • 4.5.3.4. Generating the client proxy
    • 4.5.4. Considerations for WCF Services
    • 4.5.5. Windows Service Hosting Scenarios
  • 4.6. Hosting in IIS 6.0
    • 4.6.1. IIS Service Endpoints
    • 4.6.2. IIS 6.0 Hosting Architecture
    • 4.6.3. ASP.NET Compatibility Mode
  • 4.7. IIS 7.0 and Windows Activation Service
    • 4.7.1. WAS Hosting Architecture
    • 4.7.2. Installing IIS 7.0, WAS, and WCF Communications
    • 4.7.3. Configuring IIS 7.0 and WAS
    • 4.7.4. Hosting WCF Services with WAS
  • 4.8. Choosing the Right Hosting Environment
  • 4.9. Summary
• 5. Instancing and Concurrency
  • 5.1. OperationContext
  • 5.2. Instancing
    • 5.2.1. PerCall Services
    • 5.2.2. PerSession Services
      • 5.2.2.1. Requiring sessions
      • 5.2.2.2. Session identifier
      • 5.2.2.3. Session lifetime
      • 5.2.2.4. Exception handling
    • 5.2.3. Singleton Services
    • 5.2.4. Lab: Controlling Service Instancing
      • 5.2.4.1. Working with PerCall services
      • 5.2.4.2. Working with sessions
      • 5.2.4.3. Working with singletons
  • 5.3. Concurrency
    • 5.3.1. Single Concurrency Mode
    • 5.3.2. Reentrant Concurrency Mode
    • 5.3.3. Multiple Concurrency Mode
    • 5.3.4. Custom Synchronization
    • 5.3.5. .NET Synchronization Techniques
    • 5.3.6. Asynchronous Proxies
    • 5.3.7. Lab: Protecting Shared Resources from Concurrent Access
      • 5.3.7.1. Generating an asynchronous proxy
      • 5.3.7.2. Allowing concurrent access to the singleton
      • 5.3.7.3. Adding manual synchronization with global locks
      • 5.3.7.4. Adding more granular synchronization for increased throughput
  • 5.4. Instance Throttling
    • 5.4.1. Throttling PerCall Services
    • 5.4.2. Throttling Sessions
    • 5.4.3. Throttling Singletons
  • 5.5. Load Balancing and Failover
  • 5.6. Summary
• 6. Reliability
  • 6.1. Reliable Sessions
    • 6.1.1. Configuring Reliable Sessions
      • 6.1.1.1. Standard bindings
      • 6.1.1.2. Custom bindings
      • 6.1.1.3. Requiring ordered delivery
      • 6.1.1.4. Client configuration
    • 6.1.2. How Reliable Sessions Work
      • 6.1.2.1. Session identifier
      • 6.1.2.2. Session lifetime
      • 6.1.2.3. Retry attempts
      • 6.1.2.4. Session throttling
    • 6.1.3. WS-ReliableMessaging Protocol
      • 6.1.3.1. Message flow
      • 6.1.3.2. CreateSequence
      • 6.1.3.3. CreateSequenceResponse
      • 6.1.3.4. SequenceAcknowledgement
      • 6.1.3.5. LastMessage
      • 6.1.3.6. TerminateSequence
    • 6.1.4. Lab: Working with Reliable Sessions
      • 6.1.4.1. Tracing reliable sessions messages
      • 6.1.4.2. Testing reliable session retries
  • 6.2. Transactions
    • 6.2.1. Transaction Management
      • 6.2.1.1. Two-phase commit protocol
      • 6.2.1.2. Durable versus volatile resource managers
      • 6.2.1.3. TransactionScope
      • 6.2.1.4. Lightweight Transaction Manager
      • 6.2.1.5. Kernel Transaction Manager
      • 6.2.1.6. Distributed Transaction Coordinator
      • 6.2.1.7. WS-AtomicTransaction and WS-Coordination protocols
      • 6.2.1.8. Enabling WS-AT
    • 6.2.2. Transactions and System Tiers
    • 6.2.3. Configuring WCF Transactions
      • 6.2.3.1. Enabling transaction flow
      • 6.2.3.2. Selecting a transaction protocol
      • 6.2.3.3. Transaction flow options
      • 6.2.3.4. Service operations and transactions
      • 6.2.3.5. Controlling IsolationLevel
      • 6.2.3.6. Transaction timeout
      • 6.2.3.7. Client configuration
      • 6.2.3.8. Transactions and sessions
    • 6.2.4. Lab: Configuring WCF Transactions
      • 6.2.4.1. Testing service calls without transactions
      • 6.2.4.2. Requiring client transactions
      • 6.2.4.3. Automating service transactions
      • 6.2.4.4. Rejecting client transactions
  • 6.3. Queued Calls
    • 6.3.1. MSMQ Overview
      • 6.3.1.1. Private and public queues
      • 6.3.1.2. Transactional queues
      • 6.3.1.3. Delivery failure
      • 6.3.1.4. Security
      • 6.3.1.5. MSMQ management console
      • 6.3.1.6. System.Messaging
    • 6.3.2. NetMsmqBinding Features
    • 6.3.3. Queued Service Contracts
    • 6.3.4. Durable Queues
    • 6.3.5. Transactional Queues
      • 6.3.5.1. Exactly once delivery
      • 6.3.5.2. Client transactions
      • 6.3.5.3. Queue-to-queue transactions
      • 6.3.5.4. Queued service transactions
    • 6.3.6. Transactions and Delivery Failures
      • 6.3.6.1. Delivery retries
      • 6.3.6.2. Time-to-live
      • 6.3.6.3. Poison messages
      • 6.3.6.4. Poison message queue
      • 6.3.6.5. Dead letter queues
    • 6.3.7. Security
    • 6.3.8. MsmqIntegrationBinding
    • 6.3.9. Lab: Creating a Queued Service
      • 6.3.9.1. Exposing an MSMQ endpoint
      • 6.3.9.2. Requiring MSMQ
      • 6.3.9.3. Testing offline messaging
      • 6.3.9.4. Testing exception handling
  • 6.4. Summary
• 7. Security
  • 7.1. WCF Security Overview
    • 7.1.1. Security Policy
    • 7.1.2. Binding Security
      • 7.1.2.1. Default security settings
      • 7.1.2.2. Security mode
      • 7.1.2.3. Client credential type
      • 7.1.2.4. Advanced dettings
    • 7.1.3. Supplying Credentials
      • 7.1.3.1. Client credentials
      • 7.1.3.2. Service credentials
    • 7.1.4. Message Protection
      • 7.1.4.1. Protection level
      • 7.1.4.2. Algorithm suite
    • 7.1.5. Authentication, Authorization, and Identities
      • 7.1.5.1. ServiceSecurityContext
      • 7.1.5.2. Security tokens and authentication
      • 7.1.5.3. Role-based authorization
      • 7.1.5.4. Impersonation
    • 7.1.6. WCF Security Summary
  • 7.2. Securing Intranet Services
    • 7.2.1. Lab: Authenticating and Authorizing Windows Credentials
      • 7.2.1.1. Authenticating with Windows credentials
      • 7.2.1.2. Initializing the proxy with Windows credentials
      • 7.2.1.3. Applying Windows role-based permission demands
    • 7.2.2. NetNamedPipeBinding Security Features
    • 7.2.3. NetTcpBinding Security Features
    • 7.2.4. Windows Authentication and Authorization
    • 7.2.5. Windows Role-Based Security
    • 7.2.6. Windows Client Credentials
  • 7.3. Securing Internet Services
    • 7.3.1. Lab: Authenticating and Authorizing UserName Credentials
      • 7.3.1.1. Creating two service endpoints
      • 7.3.1.2. Generating the client proxy
      • 7.3.1.3. Configuring binding security
      • 7.3.1.4. Initializing proxies with UserName credentials
      • 7.3.1.5. Configuring ASP.NET authentication and authorization
      • 7.3.1.6. Applying custom role-based permission demands
    • 7.3.2. BasicHttpBinding Security Features
    • 7.3.3. WSHttpBinding Security Features
    • 7.3.4. Negotiation
    • 7.3.5. Secure Sessions
    • 7.3.6. ASP.NET Authentication and Authorization
      • 7.3.6.1. Configuring ASP.NET providers
      • 7.3.6.2. Custom password validators
    • 7.3.7. Custom Role-Based Security
    • 7.3.8. UserName Client Credentials
  • 7.4. Working with Certificates
    • 7.4.1. Understanding Certificates, Digital Signatures, and Encryption
    • 7.4.2. Signing and Encrypting Messages
    • 7.4.3. Service Certificates and Negotiation
    • 7.4.4. Certificate Authentication
    • 7.4.5. Certificate Authorization
  • 7.5. Building a Claims-Based Security Model
    • 7.5.1. Security Tokens and Claims
    • 7.5.2. AuthorizationContext
    • 7.5.3. Custom Claims
    • 7.5.4. Custom Authorization Policies
    • 7.5.5. Lab: Creating a Custom Authorization Policy
      • 7.5.5.1. Implementing IAuthorizationPolicy
      • 7.5.5.2. Authorizing custom claims
      • 7.5.5.3. Applying custom security extensions
  • 7.6. Exploring Federated Security
    • 7.6.1. Security Token Services
    • 7.6.2. SAML Tokens
    • 7.6.3. Windows CardSpace
    • 7.6.4. LAB: Working with WSFederationHttpBinding
      • 7.6.4.1. Configuring WSFederationHttpBinding
      • 7.6.4.2. Creating an information card in CardSpace
      • 7.6.4.3. Evaluating CardSpace claims
    • 7.6.5. WSFederationHttpBinding Security Features
  • 7.7. Summary
• 8. Exceptions and Faults
  • 8.1. SOAP Faults
    • 8.1.1. Fault Versions
    • 8.1.2. Faults and WSDL
  • 8.2. WCF Exception Handling
    • 8.2.1. Fault Exceptions
    • 8.2.2. Service Exception Handling
    • 8.2.3. Client Exception Handling
  • 8.3. Exceptions and Debugging
    • 8.3.1. Lab: Working with Uncaught Exceptions
    • 8.3.2. Debugging Behavior
    • 8.3.3. Uncaught Exceptions and SOAP Faults
    • 8.3.4. Clients and Faulted Channels
  • 8.4. Fault Contracts
    • 8.4.1. Lab: Throwing Faults and Declaring Fault Contracts
    • 8.4.2. Throwing Faults
      • 8.4.2.1. FaultException
      • 8.4.2.2. FaultException<T>
      • 8.4.2.3. MessageFault
    • 8.4.3. Declared Faults
    • 8.4.4. Fault Contracts and Complex Types
    • 8.4.5. Mapping MessageFault to SOAP Fault
      • 8.4.5.1. Creating SOAP 1.1 compliant faults
    • 8.4.6. Clients and FaultContracts
  • 8.5. IErrorHandler
    • 8.5.1. Lab: Intercepting Uncaught Exceptions with IErrorHandler
      • 8.5.1.1. Implementing IErrorHandler
      • 8.5.1.2. Configuring an error handler
      • 8.5.1.3. Using data contracts as fault contracts
    • 8.5.2. IErrorHandler
    • 8.5.3. Configuring Error Handlers
      • 8.5.3.1. Implementing IServiceBehavior
      • 8.5.3.2. Attributes and IServiceBehavior
      • 8.5.3.3. Extending ServiceHost
  • 8.6. Summary
• A. Setup Instructions
  • A.1. Database Setup
    • A.1.1. Choosing a Database Engine
    • A.1.2. Installing Database Scripts
    • A.1.3. Database Connection Strings
    • A.1.4. Database Security
  • A.2. ASP.NET Provider Model Setup
    • A.2.1. Generating ASP.NET Provider Tables
    • A.2.2. ASP.NET Provider Connection Strings
    • A.2.3. Creating Sample Users and Roles
  • A.3. Certificate Setup
    • A.3.1. Sample Certificates
    • A.3.2. Certificates Console
    • A.3.3. Importing Certificates
    • A.3.4. Certificate Security
    • A.3.5. Setting Up an SSL Certificate
      • A.3.5.1. Instructions for IIS 5.1 and 6.0
      • A.3.5.2. Instructions for IIS 7.0
    • A.3.6. Generating Certificates
  • A.4. IIS Application Directories
    • A.4.1. Instructions for IIS 5.1 and 6.0
    • A.4.2. Instructions for IIS 7.0
• B. ASP.NET Meets CardSpace
  • B.1. Information Cards and CardSpace: A Brief Tour
  • B.2. Identity Metasystem Participants and Browser Flow
  • B.3. Lets Log In with CardSpace!
  • B.4. Processing the Token
  • B.5. Associating Cards with User Accounts
  • B.6. Creating a Dual Purpose Login Page
  • B.7. Conclusion
• Index
• About the Author
• Colophon
• Copyright

pokaż cały spis treści

ukryj recenzje